POWER Make Automatic Voltage Controller

Power make Servo Stabilizer / Servo Voltage Controller primarily consists of the following:

1. Linear, Plus / Minus Type Vertical Rolling Contact Voltage Regulator

In our voltage regulator we are using heavy section of electrolytic grade rectangular copper strip instead of copper wire to minimize the losses & increase the efficiency of equipment. We are also using self lubricating carbon roller assemblies instead of ordinary carbon brushes which offer more reliability and trouble free performance of the equipment.

2. Double Wound Buck / Boost Type Series Transformer

In our Buck / Boost transformer we are using CRGO lamination to minimize iron losses. Coils of Buck / Boost transformer are wound with heavy section of multi strips electrolytic copper to minimize copper losses for getting better efficiency of the equipment.

3. Electronic Control Circuit and Meter Panel

Automatic Servo Voltage Controller consists of very simple electronic control voltage circuit for monitoring and controlling voltage, repair & maintenance of which is very easy. The regulator and Buck / Boost transformer are oil cooled, housed in same or separate sheet steel tanks. Radiators are provided for effective cooling. The coils of voltage regulator & Buck / Boost Transformers are vacuum impregnated and oven dried as per IS.

Inner View of Stabilizer

(Balanced Type)

Effect of Unbalanced Input Voltage between Phase to Phase:

Industrial units situated in residential / commercial areas and not having their own distribution transformer, have the problem of unbalance input voltage between phase to phase and many have the problem of frequent failure of three phase motors. Normally unbalanced input voltage problem persists for few hours a day and will have the following effects on the three phase motors:1.With 5% Unbalanced Input Voltage between phase to phase – the LOAD will be unbalanced and the capacity of the motor reduces by 40%.2.Consumption of the three phase motor will increase by 20 – 25%.To avoid frequent tripping of the overload relays and to continue production, setting of motor relay is kept higher than actual required. The motor (particularly smaller motors upto 7.5 H.P.) cannot withstand this high current for long time and in most cases the motor burns out and this high current flows through the relays, contactors, cables etc. resulting in failure of the same and in some of the cases may cause fire also.The best option for such Units having Unbalanced input voltage, is to install servo voltage stabilizers and servo voltage controller with individual phase control

Inner view of 3500 KVA AVC


Inner view Automatic Voltage Controller

(Unbalanced type) Export

Close view of Regulator & Carbon Roller Asembly

Basic Circut