Electroplating Rectifiers (RANGE: 0-1100V/20000 AMPS)

Electroplating Rectifiers is an equipment that converts AC into DC supply. Power make Silicon Rectifiers are widely used in Electroplating, Anodizing, Hydrogenation and all other electrochemical processes. These power rectifiers, anodizing rectifiers and electroplating power rectifiers are tailor made, covering a wide range from 200 Amps to 15000 Amps at different output DC voltage as per requirement.

Electroplating Rectifiers for Dc application

(0-1100V/20000 Amps DC)

Inner View Electroplating Rectifiers

(10 V / 5000 AMPS)

Starting Circuitry

Electroplating Power Rectifiers are designed for 3 phase 50 Hz. AC input supply & are available for operations at any voltage between 380 and 440 volts, in India but can be designed for 60 Hz AC and any other voltage available. It is recommended that the input to the rectifier should be connected through a proper protective device, to provide positive protection to personal and the system, in the event of maintenance or in case a fault occurs. Also manufactures rectifier auto transformer.

DC Output Control

The function of the variable output controls is to control the voltage or current or its operating range by varying input voltage to the main transformer primary. The DC output voltage variation is achieved steplessly 0-100% by means of an On Load roller type power make voltage regulator.

Rectifiers with Detachable Radiators

  1. OTI
  2. Oil Pocket
  3. Oil Level
  4. Radiators
  5. Oil Circulation Pump
  6. Bus Bars
  7. Silica Gel Breather
  8. Butterfly Valves
  9. Earthing Terminals
  10. Oil Drain Valve
  11. UNI Directional Wheels
  12. Window for Diodes
  13. Oil Tank Indicator
  14. Lifting Lugs

12 V / 12500 Amps